Prep Table Refrigeration Repair in Cedar Park, TX

Service Date: April 1, 2026 — Cedar Park, TX Setpoint Services recently responded to a commercial kitchen in Cedar Park, TX where a Turbo Air prep table had stopped maintaining proper temperature — a critical issue for any food service operation. Technician Han Li performed a full diagnostic and had the unit repaired and recharged the same day.

What We Found

The prep table was running but failing to hold safe food temperatures. After pulling operating pressures and inspecting the system, Han confirmed a low refrigerant charge caused by a leak at the drain pan line set. Simply topping off the refrigerant would have been a temporary fix — the leak had to be addressed at the source.

Work Performed

• Diagnosed unit & confirmed low refrigerant charge
• Located refrigerant leak at drain pan line set
• Repaired & sealed leak to restore system integrity
• Pulled vacuum & performed triple evacuation to remove moisture & contaminants
• Recharged system to proper operating refrigerant levels
• Verified operating pressures: 18 PSI suction / 200 PSI discharge
• Cleaned condenser coil with water & coil cleaner to improve heat exchange efficiency

Why the Triple Evacuation Matters

After any refrigerant repair, moisture and contaminants left in the system can degrade performance and damage components over time. A triple evacuation pulls the system into deep vacuum three times, ensuring it’s clean and dry before refrigerant goes back in. This step protects the compressor and extends the life of the equipment — it’s the right way to do the job.

Follow-Up & Equipment Status

During a follow-up visit the next day, it was discovered that the prep table’s condenser coil had sustained significant physical damage. Setpoint Services contacted the manufacturer for replacement pricing and has advised the customer on next steps. The unit continues to be monitored while the customer evaluates their options. If your prep table, reach-in, or walk-in refrigeration isn’t holding temperature, don’t wait — small leaks lead to big failures. Setpoint Services provides commercial refrigeration repair throughout Cedar Park and the greater Austin metro area. Explore our reach-in cooler repair, walk-in cooler repair, and preventative maintenance contracts — or contact us to schedule service today. Call 512-992-5537 — we’re ready when your equipment isn’t. Setpoint Services — Keeping Cedar Park & Austin commercial kitchens cold and running right.