Chiller Refrigerant Retrofit

Chiller Refrigerant Retrofit. I utilized the customer-provided retrofit kit and followed all procedures as outlined in the retrofit manual. Installed a new fan
Zero Zone Reach-In Repair

Zero Zone Reach-In Repair. I cleaned condenser coil. I found incorrect controller installed on the downstairs case. I contacted tech support to identify the …
Heatcraft Refrigeration Stoppage

Heatcraft Refrigeration Stoppage. I cleaned the drain pan thoroughly and cleared the drain line using drain line cleaner to ensure proper drainage. …
Installed a High-Pressure Switch

Installed a High-Pressure Switch and condenser fan motor run capacitor. I cleaned both the condenser coil and evaporator coil. I installed new air filters …
Carrier Refrigerant Leak Repair

Carrier Refrigerant Leak Repair. The unit has been diagnosed with a refrigerant leak on the condenser. To restore operation, I repaired the refrigerant leak …
Arctic Reach-In Cooler Repair

Arctic Reach-In Cooler Repair. I cleaned the condenser coil using coil cleaner to ensure proper heat transfer and efficiency. I removed defective piercing valve
Walk-in Cleaned Condenser Coil

Walk-in Cleaned Condenser Coil. I replaced evaporator fan motor, fan blade, and fan motor bracket on Russell evaporator. Replace suction line insulation …
True Manufacturing Reach-In Repair

True Manufacturing Reach-In Repair. I replaced the suction line and capillary tube, routing both along the back of the unit and into the evaporator. …
Heatcraft Fan Motor Repair

Heatcraft Fan Motor Repair. I replaced the condenser fan motor and run capacitor on the produce reach in line up. No further action needed at this time. …
Maintenance on RTU-1

Maintenance on RTU-1. I cleaned both evaporator and condenser coils to restore proper airflow and heat exchange efficiency. The evaporator coil was found …
