hot_to_cold

Austin Texas and Surrounding Areas

Request a Free Quote

→ Fill Out the Form

Or Just Give Us A Call

512-992-5537


    Tito
    6/11/2026
    2713 Meister Place, Round Rock, TX 78664
    Setpoint Services completed preventative maintenance and deep cleaning service for a Scotsman commercial ice machine in Round Rock, Texas. Routine maintenance was performed to improve ice quality, machine reliability, and overall system efficiency. Technicians disassembled and cleaned removable components, descaled water system components using nickel-safe cleaner, sanitized food-contact surfaces, cleaned the condenser coil, and flushed the drain system. During follow-up service, a new water filter and ice thickness sensor were installed to improve machine performance and ice production consistency. The ice machine was tested through complete production and harvest cycles and verified operating properly upon completion. This project included commercial ice machine cleaning, Scotsman ice machine repair, water filter replacement, preventative maintenance, and ice machine service in Round Rock, Texas.
    Tito
    6/10/2026
    9306 N Lamar Blvd Suite E-1, Austin, TX 78753
    Setpoint Services completed commercial kitchen equipment diagnostics for a Pitco SG14S gas fryer in Austin, Texas. Restaurant staff reported ignition and heating issues preventing normal fryer operation. Technicians performed comprehensive fryer diagnostics including thermopile testing, gas pressure verification, burner operation analysis, and manufacturer-assisted troubleshooting. Testing confirmed the fryer gas valve had failed internally and was preventing proper operation. Diagnostic findings were documented and recommendations were provided for replacement of the defective gas valve. All findings were verified through Pitco technical support and manufacturer troubleshooting procedures. This project included commercial fryer repair diagnostics, restaurant equipment service, gas fryer troubleshooting, and commercial kitchen equipment repair in Austin, Texas.
    Tito
    6/10/2026
    Near Jaborandi Drive, Austin TX 78739
    Setpoint Services completed mini split air conditioning repair for a Mitsubishi ductless HVAC system in Austin, Texas. The customer reported poor cooling performance caused by a low refrigerant charge. Technicians diagnosed the system and confirmed refrigerant loss through pressure testing and system evaluation. Refrigerant was added to restore operating pressures and improve cooling capacity. Following charging, temperature split measurements confirmed proper evaporator performance and normal cooling operation. The mini split system was tested under load and verified producing an 18-degree temperature differential across the evaporator. Recommendations were provided for future leak detection if refrigerant loss reoccurs. This project included Mitsubishi mini split repair, refrigerant charging, ductless HVAC service, air conditioning repair, and residential HVAC diagnostics in Austin, Texas.
    Tito
    6/10/2026
    Near Stoneridge Road, Austin TX 78746
    Setpoint Services completed cold plunge chiller repair and preventative maintenance in Austin, Texas. The customer reported that the cold plunge system had stopped circulating water and appeared completely inoperative. Diagnostic testing identified a stuck flow switch preventing operation of the circulation system, compressor, and condenser fan motor. Technicians cleaned the flow switch assembly, removed debris from associated piping, and restored proper flow switch operation. Additional maintenance included condenser coil cleaning and verification of compressor, circulation pump, and condenser fan performance. Following repairs, the cold plunge system was tested and returned to normal operation. This project included cold plunge repair, chiller diagnostics, flow switch cleaning, condenser maintenance, and refrigeration service in Austin, Texas.
    Tito
    6/9/2026
    4106 Williams Dr, Georgetown, TX 78628
    Setpoint Services completed mini split air conditioner repair and refrigerant service for a ductless HVAC system in Georgetown, Texas. The mini split system had lost refrigerant charge and was no longer cooling properly. Technicians recovered refrigerant, performed system diagnostics, repaired service access points, evacuated the refrigeration circuit, and recharged the system with R-454B refrigerant to manufacturer specifications. Vacuum integrity testing confirmed the refrigeration system was sealed and free of leaks during evacuation. The mini split system was started, tested, and monitored following repairs. Refrigerant pressures, saturation temperatures, and overall cooling performance were verified. The system was restored to normal operation and cooling properly upon completion. This project included mini split repair, refrigerant recharge, ductless air conditioning service, HVAC diagnostics, and refrigerant system repair in Georgetown, Texas.
    Tito
    6/9/2026
    1201 South Church Street, Georgetown, TX 78626
    Setpoint Services completed commercial HVAC preventative maintenance for a restaurant in Georgetown, Texas. Multiple rooftop air conditioning systems were serviced to improve efficiency, reliability, and cooling performance before peak summer temperatures. Maintenance included condenser coil cleaning, air filter replacement, drain line cleaning, evaporator coil inspections, capacitor testing, and belt adjustments. During inspection of an R-22 rooftop HVAC system, technicians discovered low refrigerant levels affecting cooling performance. Refrigerant was added and operating pressures were restored to normal conditions. All commercial HVAC equipment was tested following service and verified operating properly. Recommendations were provided to monitor the system for potential refrigerant leaks due to the low charge condition discovered during maintenance. This project included commercial HVAC maintenance, rooftop unit service, air conditioning repair, refrigerant charging, condenser coil cleaning, and restaurant HVAC service in Georgetown, Texas.

    We are Factory Authorized Representatives for Several Commercial Refrigeration Systems!

    Setpoint_Services_Video_Overlay
    Setpoint_Services_Logo

    Why Choose Us for Commercial Refrigeration

    Here at Setpoint Services LLC, we are committed to keeping your equipment running efficiently and cost-effectively. Whether it’s a walk-in cooler, HVAC system, or ice machine, we provide reliable repairs, installations, and preventative maintenance services to meet your unique needs.

    We specialize in:

    • Walk-in Coolers/Freezers
    • Ice Machines
    • Wine Coolers & HVAC Systems
    • Energy Management Solutions

    Our expertise extends to a wide variety of businesses, including local food retailers, convenience stores, medical and drug stores, ice plants, and restaurants. We don’t just fix the problem—we ensure you understand what’s needed to get your equipment back in top shape, and we work to minimize downtime and prevent future issues.

    We also understand the importance of controlling energy expenses. That’s why we offer energy management solutions that can help reduce your operational costs. Plus, if your unit qualifies, we can provide extended labor and parts warranties to give you added peace of mind.

    Read More

    License & Certifications

    Texas TACLA00116720C

    4.9