Standex Condenser Repair
Standex Condenser Repair. I installed a new clock inside the walk-in cooler and set it to control the thermostat and liquid line solenoid for proper…
Read More »
Exhaust Hood Repair
Exhaust Hood Repair. I replaced the exhaust fan blower belt. No further action needed at this time. Confirmed the EF operates correctly ...
Read More »
York Emergency Repair Work
York Emergency Repair Work. I found the drain line clogged and cleared with nitrogen and bleach. I installed a PVC union on the drain line…
Read More »
ATOSA Drain Line Heater Repair
ATOSA Drain Line Heater Repair. I installed a new drain line heater. Verified proper operation before departure. No further action needed at this time ...
Read More »
Replaced The Compressor
Replaced The Compressor. I replaced the condenser fan motor and capacitor using existing fan blade, I replaced the liquid line filter drier ...
Read More »
Heatcraft Walk-In Cooler Repair
Heatcraft Walk-In Cooler Repair. I installed sheet Metal on the door closing armature. No further action needed at this time on 5/5/25 in Austin Texas.
Read More »
Penguin Chiller Repair
Penguin Chiller Repair. I replaced the heat exchanger. I pulled a system vacuum and charged with 1 lb. and 5 oz of r410a on 5/4/25…
Read More »
Two Door Prep Table Repair
2 Door Prep Table Repair. I found system low on charge upon arrival. I installed suction and discharge line taps, pulled a vacuum and charged…
Read More »
Repaired a Damaged Controller
Repaired a Damaged Controller. The compressor will not turn off when in defrost or when the power button is pressed. I replace the Control Board…
Read More »