Austin Texas and Surrounding Areas
⚡ 24/7 Emergency Refrigeration & AC Repair — Austin & Surrounding Areas
Same-day emergency service across Austin, Pflugerville, Round Rock, Georgetown, Cedar Park, Leander, Hutto, Taylor, Kyle, Buda, Temple & surrounding areas.
Commercial Refrigeration & HVAC Services
Austin · Pflugerville · Round Rock · Georgetown · Cedar Park · Leander · Hutto · Taylor · Kyle · Buda · Jarrell · Temple · Belton & Surrounding Areas
★ Most Requested Services
Walk-In Cooler & Freezer Repair Walk-in not cooling · compressor repair · fan motor failure · emergency walk-in freezer repair — Austin, Pflugerville & Round Rock TX Reach-In Cooler & Freezer Repair Commercial refrigerator not cooling · reach-in compressor & fan motor repair · restaurant cooler service Austin Ice Machine Repair & Service Ice machine not making ice · low ice production · restaurant ice maker repair & install — Austin, Georgetown & Hutto TX Commercial AC Repair Emergency commercial AC repair · AC not cooling · same-day HVAC diagnosis & compressor repair — Austin, Round Rock & Pflugerville TX
Commercial HVAC & Chiller Services
Commercial AC Installation New commercial HVAC installation · restaurant, retail & office AC replacement & upgrade — Austin, Cedar Park & Leander TX Water Chiller Repair Commercial water chiller repair & maintenance · process chiller troubleshooting & emergency service — Austin, Taylor & Jarrell TX Glycol Chiller Repair Glycol cooling system repair · brewery, winery & restaurant glycol chiller specialists — Austin, Cedar Park & Georgetown TX
Specialty & Kitchen Services
Exhaust Hood Systems Hood rebuild, repair & deep clean · grease baffle filter & exhaust system service — Austin, Kyle & Buda TX Hot Side Repair Commercial kitchen equipment repair · ovens, fryers, griddles & range service — Austin, Temple & Belton TX Wine Coolers Wine cooler installation & repair · commercial & residential wine refrigerator service — Austin, Leander & Lago Vista TX Refrigeration Maintenance Preventative maintenance contracts · scheduled tune-ups to prevent costly breakdowns — Austin, Round Rock & Pflugerville TX
Tito
7/24/2026
11211 E US Highway 290 Manor, TX 78653
Setpoint Services completed an emergency commercial walk-in cooler repair at Domino's Pizza, located at 11211 E US Highway 290, Manor, TX 78653, after the restaurant reported the walk-in cooler was no longer maintaining safe operating temperatures. Initial diagnostics during an after-hours emergency service call found the refrigeration system operating with a low refrigerant charge. The condenser coil was heavily contaminated and was thoroughly cleaned to restore airflow and improve heat rejection. An initial 1 pound of refrigerant was added using the remaining refrigerant available on the service truck; however, additional refrigerant was required to complete the repair, so a return visit was scheduled for the following day. During the return visit, Setpoint Services rechecked system performance and found operating pressures of 50 PSI suction and 280 PSI discharge, while the liquid line sight glass continued to flash, confirming the system was still low on refrigerant. An additional 2 pounds of refrigerant were added, restoring the proper system charge. Final operating pressures stabilized at 60 PSI suction and 320 PSI discharge, and the sight glass became full and clear, confirming a solid liquid refrigerant column. The walk-in cooler was monitored until it successfully pulled the box temperature back down to normal operating conditions. Although cooling performance was fully restored, the low refrigerant condition indicates an active refrigerant leak within the system. Setpoint Services recommended scheduling a comprehensive leak search and repair to locate the source of the refrigerant loss and prevent future breakdowns, repeated refrigerant charges, and additional emergency service calls. The walk-in cooler was operating normally at the time of departure.
Tito
7/24/2026
910 Lee Dildy Blvd Elgin, TX 78621
Setpoint Services completed commercial HVAC and refrigeration repairs at Domino's Pizza Elgin, located at 910 Lee Dildy Blvd, Elgin, TX 78621. The visit included repairs to a Trane rooftop air conditioning unit, preventative maintenance on a Daikin rooftop unit, and refrigerant service for the restaurant's walk-in cooler. The rear Trane rooftop unit was originally found with restricted condenser airflow and a failed indoor blower motor caused by an improperly secured run capacitor installed by a previous service company. During the return visit, Setpoint Services installed a new 460-volt, 1/2 HP condenser fan motor and a new 10 MFD run capacitor, rewired the motor to verify proper rotation, and tested the system after repairs. Final operating conditions measured 135 PSI suction pressure, 420 PSI discharge pressure, and an 18°F temperature split between return and supply air, confirming normal cooling performance. The front-of-house Daikin rooftop unit was also verified after condenser cleaning and produced a 17°F temperature split, confirming satisfactory operation. Although both rooftop units were operating properly at the time of departure, the Trane evaporator coil remains heavily soiled and should be professionally cleaned to improve airflow, efficiency, and long-term system reliability. Setpoint Services also restored operation of the walk-in cooler by adding 5 pounds of R-404A refrigerant to bring the refrigeration system back to its proper operating charge. After charging, the walk-in cooler successfully pulled down to the customer's 35°F setpoint. Although the liquid line sight glass continued to flash slightly, the cooler maintained proper box temperature, and the customer elected not to add additional refrigerant at that time. Both the commercial HVAC equipment and walk-in cooler were operating normally upon completion of the service visit.
Tito
7/23/2026
30500 Berry Creek Dr, Georgetown, TX 78628, USA
Completed commercial ice machine repair and preventive maintenance on a Hoshizaki KMD-505MAJ ice machine after the customer reported the unit was not producing ice properly. Upon inspection, the condenser coil was found to be heavily impacted with dirt and debris, significantly restricting airflow through the condenser. The restricted airflow caused elevated condensing temperatures, reducing refrigeration efficiency and extending ice production times. Performed a thorough condenser coil cleaning to restore proper airflow and heat rejection. After cleaning, the ice machine was monitored through a complete freeze and harvest cycle to verify proper operation. Refrigeration system performance was tested before and after the service. Final operating pressures measured approximately 55 PSIG suction and 275 PSIG discharge during the freeze cycle, which are within Hoshizaki’s recommended operating range for the existing ambient conditions. Harvest pressures were also verified and found to be normal. The freeze cycle was timed at 31 minutes, which falls within the manufacturer’s specifications. The machine completed a normal harvest cycle and resumed dropping ice properly, confirming that condenser airflow restriction was the primary cause of the production issue. At the time of departure, the commercial ice machine was operating normally with proper refrigeration pressures, acceptable freeze cycle duration, and normal harvest operation. Regular preventive maintenance, including routine condenser coil cleaning, is recommended to maximize ice production, improve energy efficiency, reduce compressor operating temperatures, and help prevent unexpected breakdowns in commercial ice machines serving restaurants, hotels, bars, and other food service facilities. Setpoint Services will follow up with the customer over the next several days to verify the machine continues producing ice normally.
Tito
7/23/2026
10212 Menchaca Rd Austin, TX 78748 United States
Completed commercial refrigeration repair on a True Refrigeration T-35 reach-in cooler after the customer reported the unit was no longer cooling properly. Upon arrival, the evaporator fan motor was operating, but the condenser fan motor and compressor were not running. A detailed electrical inspection revealed the power supply wiring feeding the condenser section had burned, causing a loss of power to the compressor and condenser fan assembly. Repaired and reconnected the damaged electrical wiring, restoring power to the refrigeration system. During the inspection, the condenser coil was found to be heavily contaminated with oil, grease, and debris, severely restricting airflow and reducing the unit’s ability to reject heat efficiently. Performed a thorough condenser coil cleaning using commercial coil cleaner to restore proper airflow and improve refrigeration performance. After completing the repairs, the reach-in cooler was restarted and monitored through normal operation. Verified proper compressor startup, condenser fan motor operation, and overall refrigeration performance. The unit successfully pulled the cabinet temperature below 40°F before departure, confirming that the refrigeration system was operating correctly. At the time of departure, the True Refrigeration reach-in cooler was operating normally with proper compressor operation, condenser airflow, and cooling performance. Routine commercial refrigeration preventive maintenance, including condenser coil cleaning and electrical inspections, is recommended to improve energy efficiency, reduce compressor operating temperatures, and help prevent unexpected refrigeration failures in busy restaurant and bar environments.
Tito
7/23/2026
10212 Menchaca Rd Austin, TX 78748
Setpoint Services completed a commercial refrigeration repair on a reach-in cooler at Tacobaby at Moontower Saloon, located at 10212 Menchaca Rd, Austin, TX 78748, after the customer reported the cooler was no longer maintaining proper temperature. Upon arrival, the evaporator fan motor was operating normally; however, both the condenser fan motor and compressor were inoperative. Electrical diagnostics revealed the power supply wiring feeding the condenser section had burned, causing a complete loss of power to the compressor and condenser fan motor. Setpoint Services repaired and reconnected the damaged electrical wiring, restoring power to the condenser section. During the inspection, the condenser coil was found heavily contaminated with grease, oil, and debris, severely restricting airflow and reducing heat transfer efficiency. The condenser coil was thoroughly cleaned using commercial condenser coil cleaner to restore proper airflow and improve refrigeration performance. After completing the electrical repair and condenser maintenance, the reach-in cooler was restarted and monitored through normal operation. The compressor and condenser fan motor resumed normal operation, and the refrigeration system successfully pulled the cabinet temperature below 40°F before departure, confirming the unit was cooling properly. The reach-in cooler was operating normally at the completion of service, helping restore reliable refrigeration for restaurant operations.
Tito
7/23/2026
6507 Circle S Rd Austin, TX 78745 United States
Completed commercial rooftop HVAC repair on a Rheem RKNL-A060JK10E rooftop unit after the customer reported the air conditioning system was not cooling properly. Upon arrival, the rooftop unit was powered on; however, the compressor was not operating. A detailed electrical inspection found the compressor run capacitor terminal connection had burned off, preventing the compressor from starting. The damaged terminal connection was repaired and securely reconnected, restoring normal compressor operation. After startup, system performance testing revealed an elevated discharge pressure of approximately 480 PSI, indicating poor condenser heat rejection. The condenser fan motor run capacitor was tested and found to be outside the manufacturer’s acceptable tolerance, reducing condenser fan performance. Replaced the failed condenser fan motor run capacitor and thoroughly cleaned the condenser coil to restore proper airflow and improve system efficiency. Following the repairs, the rooftop unit was restarted and monitored through normal operation. Final operating pressures stabilized at approximately 130 PSI suction and 430 PSI discharge, confirming improved refrigeration performance. Verified proper compressor operation, condenser fan operation, and overall cooling performance before leaving the site. At the time of departure, the Rheem rooftop unit was operating normally with proper airflow, stable refrigerant pressures, and reliable compressor operation. Routine commercial HVAC preventive maintenance, including condenser coil cleaning and capacitor testing, is recommended to improve energy efficiency, reduce compressor stress, and help prevent unexpected rooftop unit failures in commercial buildings.
Why Choose Us for Commercial Refrigeration
Here at Setpoint Services LLC, we are committed to keeping your equipment running efficiently and cost-effectively. Whether it’s a walk-in cooler, HVAC system, or ice machine, we provide reliable repairs, installations, and preventative maintenance services to meet your unique needs.
We specialize in:
- Walk-in Coolers/Freezers
- Ice Machines
- Wine Coolers & HVAC Systems
- Energy Management Solutions
Our expertise extends to a wide variety of businesses, including local food retailers, convenience stores, medical and drug stores, ice plants, and restaurants. We don’t just fix the problem—we ensure you understand what’s needed to get your equipment back in top shape, and we work to minimize downtime and prevent future issues.
We also understand the importance of controlling energy expenses. That’s why we offer energy management solutions that can help reduce your operational costs. Plus, if your unit qualifies, we can provide extended labor and parts warranties to give you added peace of mind.